“SAS SUPER ISO 100/180 ” >>>

The very familiar “yellow SAS (Surface Air System)” is considered the international standard for portable air microbiological samplers. Over 25 years experience has been gained in five continents helping microbiologists in the pharmaceutical and food industry, hospital sector and indoor air quality fields. Experience has also been gained from space exploration as the SAS (Surface Air System) was used on board the International Space station. This knowledge has resulted in the development of the new “SAS-ISO 100” and “SAS-ISO 180”.
To use a simple plate for air and surface sampling - To have the additional flexibility of choice, either Contact plates or Petri dishes - To apply cGLP and cGMP to air sampling operations - To establish data on the microbial level in selected environments - To organise sequential sampling to obtain a more representative air sample under actual operating conditions.

“DUO SAS 360 ” >>>

DUAL HEAD PORTABLE MICROBIOLOGICAL AIR SAMPLER
Single body with two aspirating heads: two separate plates may be used for simultaneous sampling to differentiate micro-organisms (onto two different media) or onto the same media to calculate an average value and to obtain a more representative result.

“SAS ISOLATOR” >>>

CRITICAL AIR MONITORING IN ISOLATOR AND BARRIER ENVIRONMENTS
It consists of a programmable unit which remains outside the controlled area and an independent sampling head which uses RODAC Contact plates or Standard 90 mm Petri dishes.

“SAS IAQ ” >>>

A simple well known air sampler to be used by Industrial Hygienists for “SBS” (Sick Building Syndrome) and “HVAC” (Heating Ventilation Air Conditioning) studies and by Agro – Food – Dairy technologists for “HACCP” (Hazard Analysis Critical Control Point) applications.

“SAS ECO ” >>>

ECOlogical, ECOnomical, robust and easy to use, the new SAS ECO provides high level performance for the operators of Industrial Hygiene, Agro-Food and Public Environmental Monitoring fields.
Volume of aspirated air programmable from 1 to over 1000 litres -• Air flow rate 100 litres of per minute - Complete with 5 sterile plastic aspirating heads sanitizable with
common disinfectants - It uses RODAC Contact plates - Reduced weight: only 1,500 grams - Robust construction for use in industrial environments - Autonomy over 70,000 litres (8 hours).

“SAS PCR ” >>>

The SAS-PCR air sampler has been specifically developed, patented and built to collect pathogenic micro-organisms dispersed in the bioaerosol for “almost in real time” detection by molecular biology tests or traditional microbiological culture tests.

“Pinocchio Super II ” >>>

“Pinocchio Super” is a microbial impaction sampler to test the microbiological quality of compressed air and gases used in Clean Room.

A compressed air source is connected to the “Pinocchio Super” system and the flow meter regulated to achieve the required flow rate, e.g.: 100 litres of air / minute. The sampling period is timed to obtain the required total sample volume, e.g. 1000 litres.

“SAS Pyramid” >>>

The microbiological air sampler should be regularly controlled according to Good Laboratory Practices and Good Manufacturing Practices to evaluate the correct functionality.
The laboratory technician should use an instrument to be sure the air sampler works according to the specifications of the producer. In fact battery faults, falls, etc. can damage the sampler.