“Pic” Sampler

needle sampler- used for taking samples of powder products from polythene and paper sacks - made of chrome-plated metal with anodised aluminium handle - sterilizable - total length: 435 mm - length without handle: 340 mm - sampler diam. 20 mm - weight: 210 g.

“Pic-Bottle” Sampler

needle sampling probe - used for taking samples of powders, granules, crystals, etc. - made of chrome-plated brass with aluminium handle - sterilizable - to be used together with a 250 ml bottle for collecting the sample - total length: 435 mm - length without handle: 340 mm - sampler diam. 20 mm - weight: 250 g.

“Mipaw” Sampler

for sampling powder products - sterilizable - conforms to FIL (Féderation Internationale de Laiterie) and IDF (International Dairy Federation) specifications for sampling powdered milk - total length: 480 mm - length without handle: 385 mm - outside diam. 28 mm - weight: 450 g.

"Multipro" Sampler

multi-sector sampler - used for taking samples of powders, pellets and grains from bags and drums - made either of anodised aluminium with stainless steel tip or entirely of stainless steel (cod. 13189 and 13190 respectively) - sterilizable - outside ³: 20 mm.

With "Multipro", samples can be taken from bags and drums at different levels simultaneously in order to obtain a truly homogeneous sample. The sampler is available with separate sectors, used generally in chemical analysis, or with connecting sectors, suitable for microbiological analysis.
Using "Multipro", the operator takes the sample simply by rotating the "T" handle to close the entry holes, pushing the sampler in the product till all sectors are well covered, rotating the handle back to its initial position to open the entry holes, then extracting the filled sampler and pouring the contents into the test containers.

“Multi-Max” Sampler

with connecting sectors - used for taking samples of powder, pellet and grain products - made anodised aluminium with stainless steel tip - sterilizable - outside diam. 50 mm.

"Multi-Max" is used for taking samples of powder, pellet and grain products from silos or shipping containers. The multisector construction of the sampler allows a representative sample to be taken from different levels.
The sampler is operated by pushing it all the way in the product and then rotating the T handle to open the entry holes.

“Endless” Sampler

for random sampling of powders - portable - case weight 3500 g - drill weight 1600 g.

The "Endless" sampler base unit consists of 1 drill, 1 battery charger and 2 rechargeable batteries

“Endless” Probes for Sampler

for “Endless” sampler - made of stainless steel.