|
|
|
Weighing Accessories
 |
“Vibrasorb” Antivibration Board
made of epoxy-painted metal - with 4 antivibration feet - overall dim.: 510x410x55 h mm - weight: 35 kg.
Analytical balances and other precision instruments may need to be insulated from vibrations generated by pumps, homogenisers, shakers, etc. by means of this antivibration board. The smooth surface is resistant to acids and bases and is easily cleaned. Sufficiently large for most types of balances, "Vibrasond" is 40 mm thick and can support a max. weight of 16 kg.
|
|
|
 |
"Wind” Dust Extraction System
protects the operator against inhaling dust while weighing - system acts also as shield for the balance against air currents - benchtop model - portable - three walls and one top panel made of transparent acrylic material to allow all-round visibility - filtering system consisting of 3 0.5-mm EN 43 filters on the back wall, easily cleaned - insulated, vibration-free motor according to EN61010 specifications - pilot light when in use - two side openings allow easy access to the balance - built in accordance with BSEN 61010-1 (IEC 1010) directives - dim.: 550x590x500 h mm - earth resistance: < 100 mV - insulation test: > 500 mV - power supply: 220 V, 50 Hz.
|
| "Wind" has been developed for protecting the operator during weighing of powdered products, such as microbiology dehydrated agars, which are potentially irritating and allergy inducing. "Wind" is recommended for work not requiring the use of a fume cupboard, but still benefiting from a protective system. |
Accessories
87140 |
filters (spare) for "Wind" dust extraction system |
6/box |
|
 |
"Wind 2” Dust Extraction System
dust extraction system for use with stereo microscopes - HEPA filter with a pre- filter - HEPA filter efficiency: 99.997% (0.3 um) - filter size: 305x305x65 mm - powerful fan to draw contaminated air away from the operator - simple Hi Lo switch controls the fan speed - indicator lights to show the status - the filters can be changed in minutes by the operator - no expensive service engineer call outs - the whole unit comes out of the box and is ready to use immediately - the frame is 20mm anodised aluminium and it is glazed with clear acrylic - a simple base tray is supplied - airspeed: high >0.5 m/s, low 0.3 m/s - outside dimensions: 640x540x500 h mm - meets LVD and is CE marked - 230 V 35 W.
|
42647 |
“Wind 2” Dust Extraction System |
1/box |
Accessories
42648 |
hepa filter (spare) |
1/box |
42649 |
pre-filter (spare) |
10/box |
|
|
|
© International PBI S.p.A. - P.Iva 09192950153
|
