DIP DIPPER - Code: 22735/22786
For liquid sampling. The valve is operated by the centre rod. The cup and tubular handle with finger grips provide a 50 cm length for immersion into cans, bottles, tanks, vats, etc. A centre rod with a finger ring activates a valve on the bottom of the cup for rapid and convenient emptying.
Applications - Milk, cream, whey, fruit juices, water and liquid in general.
Sites of use - Dairy, food industries; health and water authority.
Construction - Made of chrome-plated brass - sterilisable.
Method of use - When with drawn from the container, the liquid to be sampled is emptied from the bottom by lifting the upper ring that opens the valve.

DIP ATOS MIXER AND SAMPLER - Code: 15728
Mixing and sampling at the same time. The best solution to be sure the liquid is mixed before and during sampling. A centre rod activates a valve on the bottom of the cup for convenient emptying. The perforated disc provides ideal vertical mixing motion.
Applications - Milk, cream, whey.
Sites of use - Dairy and food industries, health authority.
Construction - Made of chrome-plated brass - sterilisable.
Method of use - The agitator is placed in the liquid and moved up and down to produce the right mixing. When withdrawn from the container, the liquid to be sampled is emptied from the bottom by pressing upwards on the flat bar valve. This is done automatically by resting the bar on the edge of the sample container.

ACID DIPPER SAMPLER - Code: 4805/4806
For removal or transfer of viscous and semiviscous materials.
Applications - Viscous and semiviscous materials including creams, ointments, etc.
Sites of use - Pharmaceutical, cosmetic and chemical industries.
Construction - Made in AISI 316 stainless steel with Teflon PTFE plunger tip.
Method of use - The sampler is inserted into the product and the sample is removed withdrawing the handle. To deposit the sample simply push the handle down.

PROBE SYRINGE SAMPLER - Code: 4746
For sampling liquids and viscous fluids. This unit has a large bore, a long needle welded to the syringe and is of particular use when sampling through small openings.
Applications - Milk, cream, whey, yogurt, liquids and semi-viscous materials.
Sites of use - Dairy and food industries; health authority.
Construction - Chromium plated syringe with transparent graduated glass barrel and stainless steel large bore needle - glass barrel and metal piston have the same thermal expansion coefficient and therefore the sampler can be sterilized by heat.
Method of use - It is used as a normal syringe.

MILK-SUCK SYRINGE SAMPLER - Code: 11102
Ideal for sampling large amounts of liquids and creams.
Applications - Milk, whey.
Site of use - Dairy industry.
Construction - Made of chrome-plated brass with transparent plexiglas barrel.
Method of use - As a traditional aspirating syringe - not autoclavable.

GLASS SAMPLER WATER SAMPLER - Code: 4804
For sampling liquids at depth. Conforms to procedures described in the U.S. Environmental Protection Agency “Handbook monitoring industrial wastewater”.
It guarantees sub-surface sampling and eliminates surface contamination, giving easy access to spillways, docks, drains, etc., without physical entry into the effluent.
A sterilized capped bottle is clamped onto the sampler and submerged.
Applications - Water, wastewater, well water.
Sites of use - Dairy, food, chemical, pharmaceutical, cosmetic industries; water authority.
Construction - Constructed of square aluminium tubing - complete with clamp, rubber sucker and graduated 1000 mL borosilicate glass sampling bottle with Teflon-lined cap - sterilisable.
Method of use - The operator can remove the cap of the bottle, collect the sample and replace the cap without touching the bottle or getting wet. In fact the cap is screwed and unscrewed thanks to the bar fitted with a rubber sucker.

SWING SWINGING SAMPLER - Code: 15729
For taking samples from rivers, sewers, tanks, etc.
The end of the sampler swings to allow collection from different angles.
Applications - Water, waste-water, well-water, rivers, lakes, etc.
Sites of use - Dairy, food, chemicals, pharmaceutical and cosmetic industries; water authority.
Construction - Extendable aluminium rod, aluminium swinging bottle holder with retaining coil.
Method of use - Remove the bottle cap, adjust the angle (0-270°), extend the rod according to your needs and collect the sample.
Replace the cap and remove the bottle.

PRESTO-LINE SAMPLER FOR BAGS - Code: 22364
If the liquid is a long way down, use “PRESTO-LINE” sampler to reach it. With 762 mm of cord, this unit will go a long way to collect a sample. The heavy bag holder will submerse the sampling bag below the surface for easy sample collection. Specially designed to hold any size “Presto-Chiuso” bag (see page 86), the holder uses a retainer ring to secure the bag firmly in place. Even in a fast flowing stream, the bag will not come loose. The unit comes in a convenient carrying case with three sizes of retainer rings to hold “Presto-Chiuso” bags.
Application - For sampling liquids from tanks, vats, streams, ponds or lake.
Sites of use - Sea, lake, well, canal, tank water.
Construction - Nylon cord, urethane bag holder.
Method of use - Fix the “Presto-Chiuso” bag to the retainer ring. Submerse the sampling bag below the water surface for collecting it. Lift the sampler, remove the bag and close it to transport the sample.